iLevel's monitoring equipment ensures an accurate measurement of the fluid level in your storage tank. Sensitive monitors, placed into the silo record any change in level. The level in the storage tank is monitored at regular intervals.

The liquid level information is collated via a control box which sends the information over the mobile phone network and on to the iLevel servers where tank levels are displayed on the iLevel website via a secure login and a dedicated mobile app. The tank data is available to you on subscription. Instant alerts add to the overall security of the system ensuring that you know the state of all your storage tanks 24 hours a day.

iLevel also tracks the location of all tanks and other key environmental data.

 

 

iLevel Ltd Product Description.

iLevel tank level system uses sensors installed on each tank to measure the level of the liquid contained in the tank. This information is transmitted via a mobile phone network to a secure server. The information is then made available to the customer via App and Web Page as a ‘subscribed for’ service, paid for annually in advance.  Minimum subscription period is two years. There is also an annual charge for the data transmitted.

1. PRESSURE SENSOR SYSTEM – all liquids

Single & Multiple Tanks:

A pressure sensor is positioned in the bottom of the tank and it measures the pressure exerted by the column of liquid above it. The cable connecting the pressure sensor to the metering device is hollow, allowing the free passage of air to the sensor from outside of the tank, enabling the pressure sensor to compensate for any changes in atmospheric pressure

Monitoring Device:

The pressure sensor is connected via the cable to the iLevel Metron2 mounted on the tank.  The cable exits the top of the tank, either via the breather pipe or, through a hole which has to be drilled into the top of the tank.  This hole is sealed with a water tight gland to prevent any moisture entering the tank. The Metron2 unit periodically powers the sensor, scales the reading into the right units and transmits to the server via the mobile phone network. There can be up to four sensors connected to each unit.

The monitoring device needs a good mobile phone signal to work; the stronger the signal the better so is never mounting inside metal cabinets or underground. The unit is weather proof as long as it is correctly sealed. Mounted inside is a SIM card which automatically selects the strongest signal from the mobile networks in the area. The unit has an integral antenna contained inside but, in the event of poor mobile phone coverage, an external antenna can be added.

The unit can be powered three ways;  an internal 3.6v, 14AH long life Battery(non-rechargeable), 110/240V ac to 6-24V dc power supply, or an external 6-24V dc power supply (solar, wind or large battery).

The unit operates a real time clock which ‘wakes’ up the device at predetermined time intervals and measures (polls) the tank level. The frequency of this action is determined by the power source and customer requirement. Typically, the unit ‘polls’ the tank every 30 minutes and only sends any information if there has been a breach to the pre-set high & low level alarms; there are 10 high & 10 low level alarms available so any change over  5% in the level is reported.

Additionally, the unit also transmits every 24 hours providing a record of the tank level on a daily basis. If nothing is received from the unit after 28 hours, an alert is sent from the iLevel system; this alerts iLevel to a loss of power or failure of the unit.

 

2. FUEL ONLY SYSTEM – oil fuels only

Single fuel tank system:

The sensor is designed specifically to measure fuel level by using the fuel as an insulator to form a capacitor in the sensor tube. As the level of the fuel changes so does the level of insulation and meaningful data can be extrapolated from the resultant readings. The unit periodically measures the fuel level and checks for any changes, thefts or leaks and reports these to iLevel. The sensor is self-contained and does not require calibration in the field.

The tank must be less than 3 metres tall and contain heating oil, kerosene or diesel (Gas Oil). The sensor probe must be installed vertically from the top to the bottom of the tank, unobstructed.

The sensor probe requires a suitable 25mm hole in the top of the tank and is cut to length based upon the internal height of the tank. The sensor is constructed so that it forms a water tight seal on the top of the tank when fitted. Once installed, the monitor measures the depth of the fuel and compares this level with the dipped reading, transmitting this to the server.

The unit needs a good mobile phone signal to work; the stronger the signal the better .The unit is weather proof as long as it is correctly sealed. Mounted inside is a SIM card which automatically selects the strongest signal from the mobile networks in the area. The unit has an integral antenna contained inside but, in the event of poor mobile phone coverage, an external antenna can be added.

The unit is battery powered using a long life internal, non-rechargeable battery. Routinely, the unit also transmits every 24 hours providing a record of the tank level on a daily basis. If nothing is received from the unit after 28 hours, an alert is sent from the iLevel system; this alerts iLevel to a complete loss of power or failure of the unit.

 

3.     iLevel Web Site & App

Once a monitoring device has been installed on the tanks, iLevel receives the dataand creates an individual iLevel MobileApp and Web Page for the customer.

This enables the customer to check the level of their tanks from anywhere in the world, simply by accessing the iLevel mobile app on your mobile phone or via your secure login.

iLevel uses intuitive and easy to read symbols which informs the customer, at a glance, of the actual level  status of their storage tanks. The daily level of each tank is stored on the internet so that the customer can receive historical data for comparison purposes.

iLevel provides alerts via the customer’s phone or email informing them of any changes in the tank levels, immediately alerting the customer to any change which has been detected by the sensor. The alerts can be programmed to meet their specific requirements; level changes or time specific, ensuring that the customer only receive these alerts when they require them.

The iLevel system can prompt the customer to re-order the product or their supplier can also subscribe to this information, enabling them to monitor and replenish the tank’s contents.

The iLevel tank level system is a cost efficient solution for;

  • Farms; Fuel, Liquid Fertilizer & LPG
  • Fuel Suppliers
  • Co Operatives & Buying Groups
  • Building Sites
  • Generators
  • Commercial & Domestic storage tanks

 

The iLevel tank monitoring system will work on all regular shaped tanks, single or groups, above or below ground, metal or plastic construction, subject to site survey.

Please download the full product description.